Ideal-Zanussi IZGS980ITX Bedienungsanleitung PDF herunterladen (Seite 7)

Cleaning of the spark plug

This feature is obtained through a ceramic ignition can-

dle with a metal electrode. Keep these components well

clean to prevent difficult lighting and check that the

burner crown holes are not obstructed.

Periodic maintenance

Periodically speak your local Service Force Centre to

check the conditions of the gas supply pipe and the

pressure adjuster, if fitted.

TROUBLESHOOTING

Problem Possible cause Remedy

There is no spark when lighting the gas • There is no electrical supply • Make sure that the unit is connected

and the electrical supply is switched

on.

• Control the fuse. If the fuse is re-

leased more than one time, refer to a

qualified electrician.

• Burner cap and crown are placed un-

even

• Make sure that the burner cap and

crown are in correct positions.

The flame is blow out immediately after

ignition

• Thermocouple is not heated sufficient • After lightning the flame, keep the

knob pushed for approximately 5

seconds.

The gas ring burns unevenly • Burner crown is blocked with food

residues

• Make sure that the injector is not

blocked and the burner crown is clear

of food particles.

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

Ideal-Zanussi IZGS980ITX Bedienungsanleitung Seite 7